What's new
By:
Filters
Roleplay UK

Join the UK's biggest roleplay community on FiveM and experience endless new roleplay opportunities!

  • The Official Roleplay UK 10 year pin badge has arrived, get one for yourself here 5 left!

Vlads BEAST

For the system itself probably around 2K GBP. With the monitors and all the other peripherals looking more like 2.8K GBP

 
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

soooo true.....

 
46 minutes ago, Vladic Ka said:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
Click to expand...
So you're finally able to run arma 3 at 25 FPS! :D

 
I get about 60-70 in Kavala after server restart. Goes down to about 40-50 towards the end of a restart. Settings on Ultra.

 
Vladic Ka said:
After my old PC bricked when the BIOS corrupted I decided that a new build was needed and with some help (thanks @Ciaran) I got the bits together and after finally getting my case yesterday I started the build.

These are an overview of the specs: 

ETVYqBx.png


Ok so the processor I got is an Intel I7-6700K one from Amazon: https://www.amazon.co.uk/gp/product/B012M8LXQW/

My motherboard is a Asus Z170 Deluxe also from Amazon: https://www.amazon.co.uk/gp/product/B0126R1XNM/

I watched a lot of YouTube this week on building PC's as I have never done it before so I was a bit tentative about attaching the CPU to the MB but I got there. Sorry about the camera shake:

View attachment 3113View attachment 3114

I got it in using the tool that came with the MB which was really handy. Looks like I forgot to take a pic of the MB with it in due to excitement!

So after that I stuck in my 32 GB of HyperX Fury DDR4 also from Amazon: https://www.amazon.co.uk/gp/product/B00TPQPURS/

vchjwcr.jpg


Next it was time to prep my case which was a Corsair Obsidian 750D ATX Full Tower: https://www.amazon.co.uk/gp/product/B00EB6O4N8/

View attachment 3116

I then removed one of the HDD drive bays as I will only use 2 for now.

G3pw5P8.jpg


I got a Corsair RM650i as a PSU: https://www.amazon.co.uk/gp/product/B00YPQN59S/

View attachment 3118

Installing was a bit tricky but I got it in.

yqRkiG8.jpg


So after that it was time to put the motherboard in the case. I only had to put one standoff in as the rest were already located. I also just about remembered to stick the back plate in:

Bh0mArF.jpg


Ok so next was the liquid cooler which is a Corsair  H110iGTX: https://www.amazon.co.uk/gp/product/B010NS1LVA/

This part was slightly more tricky as I was worried about the the backplate being loose when I attached it through the MB to the Intel standoffs but after a bit of googling I found out this was the norm and it would tighten up when the cooler was attached:

RBKLPnh.jpg


OHSRUM9.jpg


I then installed my two SSD's and HDD's into the handy screwless drives:

hRfakHZ.jpg


vVV5Utf.jpg


After that it was really just all about cabling before I stuck in the GPU (GTX 1080). Heres what it looked like when I started it for the first time:

yBpIvur.jpg


I ensured that it was all working properly then did a bit of a cable tidy and then got all the software in. Currently installing all the usual stuff and Ill get back to you in a week with my thoughts again.

Enjoy!

Edit: Ill bench it and post it soon
2122.png
!
Click to expand...
Awesome PC, Would suggest to get a higher WATT power supply for future upgrades and just safety all around, since you have liquid cooling. 

Jealus at 1080 since i got a 980 but ill get an extra 980 to get better FPS haha :D

 
i think i have a good graphics card you can get, search for:

PNY Quadro GV100 32GB

it should be a decent card

 
You must log in or register to reply here.
Back
Top